If you want to make your lights a bit smarter without changing all your bulbs, a smart dimmer switch like the Enbrighten Zigbee model is a simple answer. It fits in a normal wall box and looks like a standard light switch, but it gives you app and voice control through a Zigbee hub. In this review, I walk through what the Enbrighten Zigbee Smart Dimmer Switch 43080 does, how it feels to use day to day, how the dimming works, what the setup looks like, and what you should know before you buy. If you are wondering if this switch is worth putting in your wall, the details in this post should help you decide.
Quick answer: the Enbrighten 43080 is a Zigbee 3.0 in-wall smart dimmer, not a plain on-off switch, and it requires a neutral wire in the box. It works with any Zigbee 3.0 hub and pairs directly with a handful of Echo speakers without one. If you already dim your lights by hand and want that control from an app or your voice, this fits; if you just want lights on and off, the plain switch version is the better match.
Dimmer or Plain Switch? Which One Do You Need?
This page covers the Enbrighten Zigbee dimmer, model 43080, which adjusts brightness. If you want simple on and off control with no dimming, see our Enbrighten Zigbee smart light switch review instead.
About the Enbrighten Zigbee Dimmer Smart Light Switch 43080
Product Features:
- Handles up to 600W of incandescent bulbs or 300W of dimmable LED and CFL bulbs, which is enough for most rooms
- Uses Zigbee 3.0 and works with popular Zigbee hubs, including supported Echo devices and other compatible smart home hubs
- Works in both single pole and 3-way setups when paired with Enbrighten add-on switches
- Requires a neutral wire, so it fits best in modern switch boxes with a full neutral bundle
- Comes with two paddles in the box, white and light almond, so you can match your existing switches
- Compatible with dimmable LED, CFL, incandescent, and halogen bulbs for flexible lighting upgrades
Enbrighten Zigbee Dimmer Smart Light Switch Details
The Enbrighten 43080 is a wired in-wall dimmer that uses Zigbee 3.0. Echo Studio, Echo Show 10, and 1st or 2nd generation Echo Plus can talk to the 43080 directly, no separate Zigbee hub needed for those speakers. Everything else, including other Alexa devices, Google Assistant, and Home Assistant, needs a hub in between. Once it is set up, you can turn lights on or off and adjust brightness by voice or through your smart home app.
As a Zigbee device that stays powered all the time, this dimmer also helps your Zigbee mesh. It can extend the signal by up to 150 feet, which can help larger homes and reduce dead spots.
The 43080 uses Enbrighten’s QuickFit housing, which trims the depth by up to 20 percent compared to older Zigbee models, so it fits better into shallower boxes and tighter multi-gang setups. The SimpleWire feature makes the switch easier to install. It can auto detect line and load terminals during installation so you do not have to guess which wire is which.
There are dual ground ports on the switch, and they are offset from the mounting screws. This makes it easier to daisy chain ground wires in multi-switch boxes. A neutral wire is required for this dimmer to work, and it supports 3-way and other multi-switch setups when paired with up to four add-on switches, model 46199. In the box you get both white and light almond paddles, and the dimmer works with dimmable LED, CFL, incandescent, and halogen bulbs.
If you are not comfortable working with electrical wiring, stop and hire a licensed electrician to do the install for you.
Enbrighten 43080 Specs at a Glance
| Spec | Detail |
|---|---|
| Zigbee version | Zigbee 3.0 |
| Neutral wire | Required |
| Max load | 600W incandescent, 300W dimmable LED/CFL |
| Repeater range | Extends Zigbee mesh up to 150 feet |
| Add-on switch (3-way) | Model 46199, up to 4 per dimmer |
| Housing depth | Up to 20% less deep than older Enbrighten Zigbee models (QuickFit) |
| Bulb types | Dimmable LED, CFL, incandescent, halogen |
Our Review
I bought a couple of Enbrighten Zigbee Dimmer Smart Light Switch 43080 units to test in my house, one in the kitchen and one in a bathroom. The install went smoothly in both locations. The shallow body gave me enough space in the box, and SimpleWire made it easy to get the line and load right. They paired right away with my Zigbee setup and have stayed connected without dropping.
These switches have been in place for a couple of months now, and they have been very stable and reliable. One thing I like a lot is the actual feel of the paddle. Some smart switches feel soft or mushy when you press them. This one has a firm, clicky action that gives clear feedback when I turn the lights on or off, which makes it feel like a normal, high quality switch.
The dimming works as expected, with smooth steps instead of jumps. The switch also remembers the last dim level. If I set the lights low at night, turn them off, then turn them back on later, they come back at the same dim setting instead of going to full brightness. For me, that alone makes it a keeper.
Pros and Cons of the Enbrighten Zigbee Dimmer Smart Light Switch 43080
| Pros | Cons |
|---|---|
| Easy, straightforward install | Neutral wire required |
| Reliable Zigbee performance | No power or energy monitoring |
| Nice, “clicky” paddle feel | Wallplate not included |
| Single pole and 3-way support | Zigbee only, needs compatible hub |
| Works with LED, CFL, and incandescent | |
| Two paddle colors included | |
| Zigbee range extender |
Which Zigbee Hubs Work With the 43080
The 43080 is a Zigbee 3.0 certified device, so it pairs with most Zigbee hubs and controllers, not just Enbrighten’s own app. Home Assistant’s ZHA integration picks it up as a generic dimmer, and Zigbee2MQTT lists it by name with brightness and on/off control exposed. Hubitat and SmartThings both pair it as well, through their generic Zigbee dimmer drivers rather than an Enbrighten-specific one.
One limitation worth knowing before you buy: the 43080 does not support direct Zigbee bulb binding. You cannot pair it straight to a Zigbee bulb and skip the hub, the way you can with some Inovelli switches. Every command routes through your hub instead. For more on how mesh networking and hub choice affect devices like this one, see our guide on what to know before buying Zigbee devices.
How the 43080 Compares to Inovelli
Inovelli’s Zigbee dimmers, like the Blue Series, go further than the 43080, with direct Zigbee bulb binding, a customizable LED notification bar, and options built for people who like to fine-tune automations. The Enbrighten 43080 does not try to compete there. What it offers instead is a lower price, easy retail availability, and a dimmer that just works once it is paired to a hub. If you want the extra features and do not mind paying more, Inovelli is worth a look. If you want a straightforward dimmer that gets the job done, the 43080 covers it.
FAQ: Enbrighten 43080 Zigbee Dimmer
Does the Enbrighten 43080 need a neutral wire?
Yes. The 43080 requires a neutral wire in the switch box to work. If your box only has line, load, and ground wires with no neutral, this dimmer will not install, and you would need a no-neutral model instead.
Does it work with Home Assistant?
Yes. Home Assistant recognizes the 43080 through its ZHA integration or through Zigbee2MQTT, both treating it as a standard Zigbee dimmer with brightness and on/off control exposed.
Can it bind directly to a Zigbee bulb?
No. The 43080 does not support direct Zigbee bulb binding. It always routes commands through your hub, unlike power-user dimmers such as Inovelli’s Blue Series, which can bind straight to a bulb and skip the hub. If you are deciding between Zigbee and other wireless standards for a new build, our guide on whether Zigbee is being replaced by Thread can help.
Should I get the dimmer or the plain switch?
Get the 43080 dimmer if you want to adjust brightness, not just turn lights on and off. If dimming does not matter to you, the plain Enbrighten Zigbee switch is cheaper and simpler to install.
Summary
The Enbrighten Zigbee Smart Dimmer Switch is a solid choice if you want basic smart control for your lights without a lot of extras. It handles smooth dimming, works with common Zigbee hubs, and keeps a clean, simple look on the wall. The install is super easy and the features focus on core smart switch functions instead of advanced options. If your goal is to add reliable on, off, and dim control that fits into a Zigbee setup you already have, this switch does the job in a plain and predictable way.
