The eufy Robot Vacuum Omni E35 is set to ship in the United States starting September 25, 2026, bringing 35,000 Pa of turbo suction, a pressure-loaded mop, and a set of allergy certifications to homes that want hands-off floor cleaning. Anker’s eufy brand is positioning the Omni E35 as a single device that can both vacuum and mop, then clean itself at its base station. The company is also pairing the hardware with a long list of hygiene and allergy claims that are backed by testing and third-party marks. Pre-orders for the Omni E35 are open at eufy.com through September 24, 2026, before general shipping begins the next day.
Powerful suction and pressure-loaded mopping
The core of the Omni E35 story is its cleaning power, starting with 35,000 Pa turbo suction for vacuuming. That level of suction is aimed at pulling dirt out of carpets and grabbing fine dust from hard floors, instead of just surface debris. eufy is pitching it as a way to handle both everyday messes and deeper cleaning without swapping equipment.
For mopping, the Omni E35 uses what eufy calls a HydroJet 2.0 self-cleaning roller mop. The roller mop is held against the floor at a constant 16 newtons of downward pressure, which is meant to keep scrubbing performance steady instead of letting the mop just glide over the surface. The system is designed to handle stuck-on grime along with light daily cleaning, without the user needing to push down or “spot scrub” by hand.
The Heavy Stain Deep Mop mode targets tougher spots that need more time and moisture to break up. In this mode, the robot can soak a stain for up to 20 minutes before scrubbing, which eufy frames as a way to deal with dried spills or sticky marks that normal passes might leave behind. The goal is to let the robot take on jobs that might otherwise need a sponge or manual mopping session.
Self-cleaning base with hot water and hot air
The Omni E35’s base station is built to keep the mop roller cleaner between runs, so the robot is not dragging a dirty mop pad around the house. eufy says the base washes the mop with 140-degree Fahrenheit hot water, which is much warmer than room-temperature rinses. Hot water washing is used to loosen oils, stuck-on particles, and other grime that cold or lukewarm water can leave behind.
After washing, the base dries the mop with hot air. eufy’s pitch is that hot air drying helps prevent damp, musty mops from sitting for hours, which many users worry about with robot mops. This cycle is meant to cut down on odor and keep the roller ready for the next job without the owner needing to pull it off and air dry it in a sink or laundry room.
That pairing of hot water cleaning and hot air drying is aimed at people who want full-time mopping but do not want to micro-manage the tool. Instead of rinsing pads or rollers by hand after every run, the owner can let the base handle the dirty work. For households that run the robot often, automated washing and drying can be especially important for keeping performance consistent over time.
Long-lasting filtration and detangling brushes
On the vacuum side, the Omni E35 uses AeroTurbo 2.0 multi-cyclone filtration. This system is built to keep suction performance from dropping quickly as dust builds up inside the unit. TUV SUD verified that the AeroTurbo 2.0 multi-cyclone filtration maintains its performance for up to 365 days, which supports eufy’s claim that users can expect stable operation over extended use without frequent filter changes affecting suction.
Hair and fibers are another daily challenge for robot vacuums, especially in homes with long-haired people or pets. The Omni E35 addresses this with DuoSpiral detangling brushes. These brushes are designed to cut down on hair wrapping tightly around the brush, which can be a common chore with older designs that need to be pulled apart and cleaned with scissors or tools.
By focusing on both filtration and brush maintenance, eufy is aiming at users who want low-intervention operation. A robot that keeps its suction strong and avoids brush tangles needs less manual cleaning and repair. That helps support a setup where the Omni E35 runs several times a week or even daily, with the owner only occasionally checking on the system.
Edge cleaning and smart obstacle avoidance
Getting close to walls and into corners has always been tricky for round robot vacuums. eufy addresses this with what it calls CornerRover true corner coverage. The company says this system lets the Omni E35 reach to within 5 millimeters or less of a wall, which shrinks the gap many users see along baseboards where dust tends to collect. That focus on edge cleaning is meant to make the perimeter of rooms look as clean as open floor space.
Navigation and obstacle avoidance are handled by AI.See 3.0 with night vision. According to eufy, this system can recognize over 280 objects, which can include things like furniture legs, cords, shoes, and small everyday items. Night vision means the robot is not limited to bright daytime runs and can still identify items and move around them in low light or at night.
Better object recognition and avoidance are important for people worried about the robot getting stuck or dragging hazards around the house. By spotting more types of items and reacting in real time, AI.See 3.0 with night vision is meant to let the robot run on its own more reliably. That can matter in busy homes where floors are not always perfectly picked up before a cleaning cycle.
Allergy and hygiene certifications
Hygiene is a major part of the Omni E35 story, with eufy pointing to lab testing and several certifications. TUV SUD certified 99.99 percent bacteria elimination for the HydroJet 2.0 roller mop self-cleaning wash, according to eufy. The company also states that the Omni E35 can reduce dust mite and cat allergens by up to 98 percent on carpets and 99.9 percent on hard floors. For families dealing with allergies or sensitivities, those numbers are meant to show that the robot is doing more than just surface cleaning.
TUV SUD also granted the Omni E35 the Maternal and Infant Cleaning Robot mark, according to eufy. That mark is aimed at products judged suitable for homes with babies or young children, where concerns about hygiene and chemical exposure are especially strong. eufy pairs this with its own messaging about using the Omni E35 for families that care about cleaner floors where kids crawl and play.
Asthma and Allergy Friendly certification adds another layer. The Asthma and Allergy Foundation of America together with Allergy Standards Limited awarded this certification to the Omni E35, according to eufy. That standard is focused on products that meet criteria for reducing exposure to common allergens in the home. For buyers who look for specific badges before bringing devices into their living space, these marks are likely to carry weight.
Availability and the Omni C30 series
For shoppers in the United States, eufy is limiting the first wave of orders to its own site before general shipment. Pre-orders for the Omni E35 are open at eufy.com and are scheduled to close on September 24, 2026. Shipping is set to begin on September 25, 2026, which means early buyers will start seeing units arrive shortly after the preorder window wraps up. That timing gives interested customers a clear window to reserve the new robot before broader availability.
Alongside the Omni E35, eufy also announced two related models: the Omni C30 and the Omni C30 Edge, both planned for launch in fall 2026. On the C30 Edge, a side-facing laser reads baseboard shape in real time and recognizes over 100 baseboard profiles, then physically extends the mop pad outward by up to 76 millimeters to reach closer to walls and into tight gaps where fixed mops might not reach.
Together, the Omni E35, Omni C30, and Omni C30 Edge show eufy leaning into vacuum-and-mop combos with automatic care features and allergy-focused credentials. The Omni E35 sits in that group as the early arrival with 35,000 Pa suction, HydroJet 2.0 mopping, CornerRover edge cleaning, AI.See 3.0 object recognition, and a set of hygiene certifications. For people who want a single robot to vacuum, mop, and maintain its own cleaning gear, the Omni E35 is positioned as a high-spec option entering the market at the end of September 2026.
View the original press release.
